Your subscription could not be saved. Please try again.
Your subscription has been successful.
Aspect 3 Tent Pitching Instructions
the Aspect 3 tent features a huge full-length inner and porch for exceptional comfort, space and flexibility, with a neat gear storage tray allowing access to kit without leaving the inner. Read the Aspect 3 tent pitching instructions below:
- Unpack and lay out the flysheet, with the black hoods uppermost (the inner tent is already attached).
- Unpack the poles. Carefully join each pole section together and slide through the black pole sleeves, under the black hoods.
- Insert the ends of each pole in the eyelets provided (a-b and c-d)
- Clip the flysheet to each pole.
- Pull the 2 black pole hoods over each pole and peg out loosely. Securely attach the hood to the poles using the
- Velcro at the corner of each pole hood, directly below each corner joint.
- Peg out the remaining points, and re-tighten the 2 pole hoods, so that the roof is taught.
- Cross guy feature: Attach the 4 guys, using the rings provided, under the black hoods. For maximum stability and ease of use, cross the guys to form an ‘X ‘ at each end of the tent, using the existing corner pegs.
The Aspect 3 is supplied with the following:
- 2 x 9mm DAC poles
- 14 x pegs
- 10 x guy ropes.
- 1 x repair patch
The Aspect 3 tent has been discontinued. If you’re looking for a similar tent, try the Helm Compact 3.