Axis 2 Pitching Instructions

The Axis 2 is a stable, free-standing dome tent that offers two doors and porches for ample space. Read the Axis 2 tent pitching instructions below:

1. Unpack the tent and lay out the inner tent. It is advisable to peg out at least one corner especially if it is windy.
2. Carefully assemble the one piece alloy pole set ensuring that all joints are fully connected.
3. Ensure that the short pole crosses over the top of both long pole sections for best tension. Now insert the end of the long poles into the eyelets A to A and B to B
4. Starting from the top, clip the inner to the long pole sections. Once clipped, insert the cross pole ends into points C and C. Now attach the final apex clip to the cross pole.
5. Place the flysheet over the inner tent with the coated side on the inside and clip it to the buckles at each corner.
6. Peg out in the following order:-

• a) The four corners of the inner tent where the poles are located in the eyelets – A and B
• b) The two porch pegging points – D
• c) The remaining flysheet elastics plus guy lines.

The Wild Country Axis 2 is supplied with:

• 1 Piece alloy pole
• 12 x alloy pegs