Norte Compact 1 & 2 – Pitching Instructions

1. Unpack tent and lay out flysheet and inner. (Note: The inner tent is already attached to the inside of the flysheet)
2. Carefully assemble the alloy pole. Ensure all the joints are fully connected.
3. Slide the main pole through flysheet pole sleeve, shown as the line on the diagram above.
4. Insert each pole-end into the corresponding eyelet tab on the hem of the flysheet, tabs are located at points A and B on diagram above.
5. Insert the short end poles in the red pockets, at each end under the flysheet vent covers.
6. Peg out the guylines at each end first and tension, then peg out the rest of the flysheet.
7. Use 1 or 2 walking poles tosupport the awning feature.

Norte Compact 1 is supplied with:

• x1 main alloy pole
• x2 endalloypoles
• x11 ‘V’ alloy pegs

Norte Compact 2 is supplied with:

• x1 main alloy pole
• x2 endalloypoles
• x11 ‘V’ alloy pegs