These tent pitching instructions are for the Laser Ultra 1.
Lay out the flysheet and inner (note: the inner tent is already attached to the inside of the flysheet)
Carefully assemble the alloy pole. Ensure all the joints are fully connected.
Slide pole through flysheet pole sleeve.
Insert each pole-end into the corresponding eyelet tab on the hem of the flysheet.
Peg out: in the following order:
i) Guy rope attached to each end of the inner.
ii) Guy rope at each end of the flysheet (the carbon fibre poles should slope out slightly at the top).
iii) Remaining inner and flysheet tapes and elastics.