Expedition Hyperspace Tent Pitching Instructions

1. Lay out the inner tent
2. Carefully assemble the 5 poles. Ensure all the joints are fully connected.
3. Slide the blue poles through the blue pole sleeves on the inner.
4. Insert a pole-end into the outermost eyelet of each inner eyelet tape.
5. Peg out inner tent.
6. Insert the red pole in the flysheet pole sleeve.
7. Throw flysheet over the inner tent.
8. Matching the colour of the eyelet tape on the hem of the flysheet with the red pole, insert a pole-end into the outermost eyelet on each tape.
9. Insert the red pole at points A and B. See diagram below.
10. Peg out flysheet.
11. Remember to adjust the flysheet tension as conditions alter (the flysheet will tighten in strong sunlight and slacken if it gets wet).

The Expedition Hyperspace is supplied with the following:

• 5 x alloy poles (4 blue, 1 red)
• 18 x 5g titanium pegs

Expedition Hyperspace Tent Pitching Video