Free Delivery Over £50

Voyager Tent Pitching Instructions

For over 25 years the Voyager tent has been a favourite for backpackers and trekkers for year-round camping due to its aerodynamic shape and semi-geodesic design. Read the Voyager tent pitching instructions below:

  1. Lay out the inner tent.
  2. Carefully assemble each of the 3 poles. Ensure all the joints are fully connected (all the poles are the same length).
  3. Using the diagram below, slide the poles through the pole sleeves on the inner tent as follows:
    – Pole 1 (blue) diagonally between A and B, making sure the pre-curved section is at the back of the tent.
    – Pole 2 (blue) diagonally between C and D, making sure the pre-curved section is at the back of the tent.
    – Pole 3 (red) between E and F.
  4. Insert each pole-end into the outermost eyelet of each inner eyelet tape. Tapes are colour-coded and located at points A to F on the diagram on the download link below.
  5. Throw flysheet over inner tent.
  6. Insert each pole-end into the corresponding eyelet tape on the hem of the flysheet, shown near points A to F on the diagram opposite.
  7. Peg out the tent.

The Voyager is supplied with the following:

  • 3 x alloy poles (1 x red, 2 x blue)
  • 12 x alloy pegs

Voyager

Voyager Tent Pitching Video