Aspect 2.5 Tent Pitching Instructions

Read the Aspect 2.5 tent pitching instructions below:

1. Unpack and lay out the flysheet, with the black hoods uppermost (the inner tent is already attached).
2. Unpack the poles and carefully join each pole section together.
3. Push each pole through the pole sleeve under each hood and insert the ends of each pole in the eyelets provided (a-b and c-d).
4. Clip the flysheet to each pole at the four corner points and sides.
5. Pull the two black pole hoods over each pole and peg out loosely.
6. Securely attach the hood to the poles using the Velcro at the corner of each pole hood, directly below each corner joint.
7. Peg out the remaining points and re-tighten the two-pole hoods, so that the roof is taught.
8. Cross guy feature: Attach the four guys, using the hooks provided, to the plastic rings below the corner joints. For maximum stability and ease of use, cross the guys to form an ‘X’ at each end of the tent, using the existing corner pegs.

The Aspect 2.5 is supplied with the following:

• 2 x 9mm DAC poles
• 10 x steel pegs
• 6 x guy ropes

The Aspect 2.5 tent has been discontinued. If you’re looking for a similar tent, try the Helm Compact 2.