Duolite Tourer Tent Pitching Instructions

The Wild Country Duolite Tourer’s low packed weight of 2.95kg makes it suitable for anyone looking to sleep two and have masses of porch space. Read the Duolite Tourer tent pitching instructions below:

1. Lay out the flysheet and inner tent, with the flysheet uppermost.
2. Carefully join the pole sections together, for the long, medium and short poles. The long pole has 3 end-tips, one red an 2 silver.
3. Match the red pole end-tip, to the red flysheet eyelet tape and insert.
4. Match the 2 silver end-tips to the blue flysheet eyelet tapes, and insert. The long pole will now be standing over the flysheet and inner tent.
5. Connect the short pole to the silver pole hubs on each side of the long pole.
6. The complete pole set will now be standing over the flysheet.
7. Starting with the centre hooks and working outwards, clip the flysheet to the pole. Ensure that the 1 x single hook in the middle of the roof, locates behind the silver pole-hub A. Ensure that the 2 x single hooks at the side of the tent, locate under the side pole-hubs B.
8. Insert the remaining pole into the black eyelet tapes, at the front of the tent to form the Extended porch.
9. Clip the flysheet to the pole, starting with the centre hook, and working outwards.
10. Peg out and adjust the remaining flysheet and inner peg points. The flysheet tension can now be varied, if needed, by moving the pole foot of each pole to a different eyelet.
11. Remember to adjust the flysheet tension as conditions alter (the flysheet will tighten in strong sunlight and slacken if it gets wet).

Note: For maximum foot space, peg the red webbing tape, located under the red eyelet tape, inwards, towards the inner tent.

Duolite Tourer is supplied with the following:

• 17 x ‘v’ angle alloy pegs
• 3 x alloy poles

The Duolite Tourer is no longer available, we recommend the Hoolie Compact 2 ETC.